Prosím počkejte chvíli...
Nepřihlášený uživatel
Nacházíte se: VŠCHT PrahaFCHTLaboratoř anorganických materiálů  → O ústavu → Vybrané publikace
iduzel: 20668
idvazba: 25596
šablona: stranka
čas: 15.12.2019 04:14:57
verze: 4621
uzivatel:
remoteAPIs:
branch: trunk
Obnovit | RAW

Vybrané publikace

  • 2019

  •  
  • Guillen D.P., Lee S., Hrma P., Traverso J., Pokorny R., Klouzek J., Kruger A.A. (2019): Evolution of Chromium, Manganese and Iron Oxidation State during Conversion of Nuclear Waste Melter Feed to Molten Glass. Journal of Non-Crystalline Solids. (accepted)
  • Pokorny R., Hrma P., Lee S., Klouzek J., Choudhary M., Kruger A. (2019): Modeling batch melting: Roles of heat transfer and reaction kinetics. Journal of the American Ceramic Society. doi: 10.1111/jace.16898
  • Lee S., McCarthy B., Hrma P., Chun J., Pokorny R., Klouzek J, Kruger A. (2019): Viscosity of glass-forming melt at the bottom of high-level waste melter-feed cold caps: effects of temperature and incorporation of solid components. Journal of the American Ceramic Society. doi: 10.1111/jace.16876
  • Appel C.J., Klouzek J., N.J., Lee S., Dixon D.R., Hrma P., Pokorny R., Schweiger M.J., Kruger A.A. (2019): Effect of sucrose on foaming and melting behavior of a low-activity waste melter feed. Journal of the American Ceramic Society.  102, 7594-7605. doi: 10.1111/jace.16675
  • Hrma P., Klouzek J., Pokorny R., Lee S.,  Kruger A.A. (2019). Heat Transfer from Glass Melt to Cold Cap: Gas Evolution and Foaming. Journal of the American Ceramic Society. 102, 5853-5865. doi: 10.1111/jace.16484
  • Lee S., Hrma P., Pokorny R., Klouzek J., Eaton W., Kruger A.A. (2019). Glass production rate in electric furnaces for radioactive waste vitrification. Journal of the American Ceramic Society. 102, 5828-5842. doi: 10.1111/jace.16463 
  • Lee S., Hrma P., Pokorny R., Traverso J.J., Klouzek J., Schweiger M.J.,Kruger A.A. (2019). Heat Transfer from Glass Melt to Cold Cap: Effect of Heating Rate. International Journal of Applied Glass Science. 10, 401-413. doi: 10.1111/ijag.13104
  • Hujova M., Klouzek  J., Cutforth D.A., Lee S., Miller M.D., McCarthy B., Hrma P., Kruger A.A., Pokorny R. (2019). Cold-cap formation from a slurry feed during nuclear waste vitrification. Ceramics International 45, 6405-6412. doi: 10.1016/j.ceramint.2018.12.127
  • Hrma P., Pokorny R., Lee S., Kruger A.A. (2019). Heat Transfer from Glass Melt to Cold Cap: Melting Rate Correlation Equation. International Journal of Applied Glass Science. 10, 143-150. doi: 10.1111/ijag.12666
  • Jebavá M., Hrbek L., Němec L. (2019). Energy distribution and melting efficiency in glass melting channel: Effect of heat losses, average melting temperature and melting kinetics. Journal of Non-Crystalline Solids . doi: 10.1016/j.jnoncrysol.2019.119478
  • Jilkova K., Mika M., Kostka P., Lahodny F., Nekvindova P., Jankovsky O., Bures R., Kavanova M. (2019). Electro-optic glass for light modulators. Journal of Non-Crystalline Solids. 518, 51-56. doi: 10.1016/j.jnoncrysol.2019.05.014
  • Bosak O, Castro A., Labas V., Trnovcova V., Kostka P., Calvez L., Le Coq D., Kubliha M. (2019). Influence of NaI Additions on the Electrical, Dielectric, and Transport Properties in the GeS2-Ga2S3-NaI Glass System. Russian Journal of Electrochemistry. 55, 501-509. doi: 10.1134/S1023193519060053
  • Kostka P., Ivanova Z.G., Nouadji M., Černošková E., Zavadil J. (2019). Er-doped antimonite Sb2O3−PbO−ZnO/ZnS glasses studied by low-temperature photoluminescence spectroscopy. Journal of Alloys and Compounds. 700, 866-872. doi: 10.1016/j.jallcom.2018.11.361
  • 2018

  • Vernerová M., Němec L., Kloužek J., Hujová M. (2018). Gas Release Phenomena in Soda-lime-silica Glass.  Journal of Non-Crystalline Solids 500, 158-166. doi: 10.1016/j.jnoncrysol.2018.07.058
  • Guillen D.P.,  Abboud A.W., Pokorny R., Eaton W.C., Dixon D., Fox K., Kruger A.A. (2018). Validation Hierarchy for Waste Vitrification Models. Transactions of the American Nuclear Society. 118, 1173-1176. Open Access
  • Guillen D.P., Abboud A.W., Pokorny R., Eaton W.C., Dixon D., Fox K., Kruger A.A. (2018): Development of a Validation Approach for an Integrated Waste Glass Melter Model. Nuclear Technology 203, 244-260. doi: 10.1080/00295450.2018.1458559
  • McCarthy B.P., George J.L., Dixon D.R.,   Wheeler M., Cutforth D.A., Hrma P., Linn D., Chun J., Hujova M., Kruger, A.A., Pokorny R. (2018). Rheology of simulated radioactive waste slurry and cold cap during vitrification. Journal of the American Ceramic Society. 101, 5020-5029. doi: 10.1111/jace.15755.
  • Hujova M., Pokorny R., Klouzek J., Seungmin L., Traverso J.J., Schweiger M.J., Kruger A.A., Hrma P. (2018). Foaming during Nuclear Waste Melter Feeds Conversion to Glass: Application of Evolved Gas Analysis. International Journal of Applied Glass Science. 9, 487-498. doi: 10.1111/ijag.12353
  • Hrbek L., Jebava M., Nemec L. (2018). Energy distribution and melting efficiency in glass melting channel: Diagram of melt flow types and effect of melt input temperature. Journal of Non-Crystalline Solids. 482, 30-39. doi: 10.1016/j.jnoncrysol.2017.12.009
  • Jebavá M., Němec L. (2018). Role of Glass Melt Flow in Container Furnace Examined by Mathematical Modelling. Ceramics-Silikaty 62, 86-96. doi: 10.13168/cs.2017.0049
  • Gedikoglu N.,  Celikbilek Ersundu M., Kostka P., Basinova N., Ersundu A.E. (2018). Investigating the influence of transition metal oxides on temperature dependent optical properties of PbCl2–TeO2glasses for their evaluation as transparent large band gap. Journal of Alloys and Compounds .748, 687-693. doi: 10.1016/j.jallcom.2018.03.209
  • Sayyed M.I., Celikbilek Ersundu M., Ersundu A.E., Lakshminarayana G., Kostka P. (2018). Investigation of radiation shielding properties for MeO-PbCl2-TeO2 (MeO = Bi2O3, MoO3, Sb2O3, WO3, ZnO) glasses. Radiation Physics and Chemistry. 144, 419-425. doi: 10.1016/j.radphyschem.2017.10.005

    2017

  • Lee S.,  Hrma P., Pokorny R., Klouzek J., VanderVeer B., Rodriguez C., Chun J., Schweiger M., Kruger A. (2017). Effects of alumina sources (gibbsite, boehmite, and corundum) on melting behavior of high-level radioactive waste melter feed. MRS ADVANCES211, 603-608. 
    doi: 10.1557/adv.2016.644
  • Kavanová M., Kloužková A., Kloužek J. (2017). Characterization of the interaction between glazes and ceramic bodies. Ceramics-Silikaty61, 267–275. doi: 10.13168/cs.2017.0025
  • Lee S., Hrma P., Pokorny R., Klouzek J., VanderVeer B.J., Dixon D.., Luksic S.A., Rodriguez C.P., Chun J.,  Schweiger M.J., Kruger A.A. (2017). Effect of melter feed foaming on heat flux to the cold cap. Journal of Nuclear Materials. 496, 54-65. doi: 10.1016/j.jnucmat.2017.09.016
  • Lee S., Hrma P., Kloužek J., Pokorný R., Hujová M., Dixon D.R., Schweiger M.J., Kruger A.A. (2017): Balance of oxygen throughout the conversion of a high-level waste melter feed to glass. Ceramics International. 4313113-13118.  doi: 10.1016/j.ceramint.2017.07.002
  • Hujova M., Pokorny R., Klouzek J., Dixon D.R., Cutforth A., Seungmin Lee, McCarthy B.P., Schweiger M.J., Kruger A.A., Hrma P. (2017): Determination of Heat Conductivity of Waste Glass Feed and its Applicability for Modeling the Batch-to-Glass Conversion. Journal of the American Ceramic Society. 100, 5096-5106.  doi: 10.1111/jace.15052
  • Harris W. H., Guillen D. P., Kloužek J., Pokorný R., Yano T., Lee S.-M., Schweiger M. J., Hrma P. (2017): X-ray tomography of feed-to-glass transition of simulated borosilicate waste glasses. Journal of the American Ceramic Society. 100, 3883–3894. doi: 10.1111/jace.14895
  • Rotrekl J., Storch J., Kloužek J., Vrbka P., Husson P., Andresová A., Bendová M., Wagner Z. (2017): Thermal properties of 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids with linear, branched and cyclic alkyl substituents. Fluid Phase Equilibria 443, 32-43. doi: 10.1016/j.fluid.2017.03.02 
  • Hujová M., Vernerová M. (2017): Influence of fining agents on glass melting: a review, Part 2. Ceramics-Silikáty, 61, 202-208. doi:10.13168/cs.2017.0017
  • Hujová M., Vernerová M. (2017): Influence of fining agents on glass melting: a review, Part 1. Ceramics-Silikáty, 61, 119-126. doi:10.13168/cs.2017.0006
  • Hrbek L., Kocourková P., Jebavá M., Cincibusová P., Němec L. (2017). Bubble removal and sand dissolution in an electrically heated glass melting channel with defined melt flow examined by mathematical modelling. Journal of Non-Crystalline Solids, 456, 101-113. doi: 10.1016/j.jnoncrysol.2016.11.013
  • Lee, S., VanderVeer, B. J., Hrma, P., Hilliard, Z. J., Heilman-Moore, J. S., Bonham, C. C., Pokorny, R., Dixon, D. R., Schweiger, M. J. and Kruger, A. A. (2017). Effects of Heating Rate, Quartz Particle Size, Viscosity, and Form of Glass Additives on High-Level Waste Melter Feed Volume Expansion. Journal of the American Ceramic Society. 100, 583-591. doi:10.1111/jace.1462
  • Ivanova Z. G., Zavadil J., Kostka P., Djouama T., Reinfelde M. (2017): Photoluminescence properties of Er-doped Ge–In(Ga)–S glasses modified by caesium halides. Physica Status Solidi B. 254No. 6, 1600662.  doi: 10.1002/pssb.201600662
  • Kostka P., Kabalci I., Tay T., Gladkov P., Zavadil J. (2017): Investigation of Er doped zinc borate glasses by low-temperature photoluminescence. Journal of Luminescence. 192, 1104-1109. doi: 10.1016/j.jlumin.2017.06.010

    2016

  • Pabst W., Gregorová E., Uhlířová T., Nečina V., Kloužek J., Sedlářová I. (2016). Microstructure, elastic properties and High-Temperature behavior of silica refractories, in: Ceramic Transaction. Wiley. pp. 113-124. doi: 10.1002/9781119234593.ch12
  • Pabst W., Gregorová E., Kloužek J., Kloužková A., Zemenová P., Kohoutková M., Sedlářová I., Lang K., Kotouček M., Nevřivová L., Všianský D. (2016). High-temperature Young’s moduli and dilatation behavior of silica refractories. Journal of the European Ceramics Society, 35, 209-220. doi:10.1016/j.jeurceramsoc.2015.09.020
  • Matějec V., Pedlíková J., Bartoň I., Zavadil J., Kostka P. (2016). Optical properties of As2S3 layers deposited from solutions. Journal of Non-Crystalline Solids, 431, 47-51. doi:10.1016/j.jnoncrysol.2015.04.027

    2015

  • Jebavá M., Dyrčíková P., Němec L. (2015). Modelling of the controlled melt flow in a glass melting space — Its melting performance and heat losses. Journal of Non-Crystalline Solids, 430, 52-63. doi:10.1016/j.jnoncrysol.2015.08.039
  • Kubliha M., Soltani M.T., Trnovcová V., Legouera M., Labaš V., Kostka P., Le Coq D., Hamzaoui M. (2015). Electrical, dielectric, and optical properties of Sb2O3–Li2O–MoO3 glasses. Journal of Non-Crystalline Solids, 428, 42-48. doi:10.1016/j.jnoncrysol.2015.07.021
  • Kostka P., Zavadil J., Iovu M.S., Ivanova Z.G., Furniss D., Seddon A.B. (2015). Low-temperature photoluminescence in chalcogenide glasses doped with rare-earth ions. Journal of Alloys and Compounds, 648, 237-243. doi:10.1016/j.jallcom.2015.05.135
  • Cincibusová P., Němec L. (2015). Mathematical modelling of bubble removal from the glass melting channel with defined melt flow and the relation between the optimal flow conditions of bubble removal and sand dissolution. Glass Technol.: Eur. of Glass Sci. and Technol. Part A, 56, 52-62. Ingentaconnect
  • Vernerová M., Kloužek J., Němec L. (2015). Reaction of soda-lime-silica glass melt with water vapour at melting temperatures. Journal of Non-Crystalline Solids , 416, 21-30. doi:10.1016/j.jnoncrysol.2015.02.020
  •  Vernerová M., Cincibusová P., Kloužek J., Maehara T., Němec L. (2015). Method of examination of bubble nucleation in glass melts. Journal of Non-Crystalline Solids411, 59-67. doi:10.1016/j.jnoncrysol.2014.12.025

    2014

  • Zavadil J., Ivanova Z.G. Kostka P., Hamzaoui M., Soltani M.T. (2014). Photoluminescence study of Er-doped zinc–sodium–antimonite glasses. Journal of Alloys and Compounds, 611, 111-116. doi:10.1016/j.jallcom.2014.05.102
  • Kubliha M., Kostka P., Trnovcová V., Zavadil J., Bednarčík J., Labaš V., Pedlíková J., Dippel A.Ch., Liermann H.P., Psota J. (2014): Local atomic structure and electric properties of Ge20Se80-xTex (x=0, 5, 10 and 15) glasses doped with Ho. Journal of Alloys and Compounds, 586, 308-313. doi:10.1016/j.jallcom.2013.10.059
  • Matěj J., Jebavá M. (2014). Oxygen bubble development on a platinum electrode in borosilicate glass melt by the effect of alternating current. Ceramics-Silikaty, 58, 249-259. Open Access
  • Hrbek L., Dyrčíková P., Němec L., Jebavá, M. (2014). Industrial opportunities of controlled melt flow during glass melting, part 2: Potential applications. Ceramics-Silikáty, 58, 202-209. Open Access
  • Dyrčíková P., Hrbek L., Němec L. (2014). Industrial opportunities of controlled melt flow during glass melting, part 1: Melt flow evaluation. Ceramics-Silikaty, 58, 111-117. Open Access

    2013

  • Zavadil J., Kubliha M., Kostka P., Iovu M., Labas V., Ivanova Z.G. (2013). Investigation of electrical and optical properties of Ge–Ga–As–S glasses doped with rare-earth ions. Journal of Non-Crystalline Solids, 377, 85-89. doi:10.1016/j.jnoncrysol.2013.02.009
  • Bošák O., Kostka P., Minárik S., Trnovcová V., Podolinčiaková J., Zavadil J. (2013). Influence of composition and preparation conditions on some physical properties of TeO2–Sb2O3–PbCl2 glasses. Journal of Non-Crystalline Solids, 377,  74-78. doi:10.1016/j.jnoncrysol.2013.01.014
  •  Kloužková A., Zemenová P., Kohoutková M., Kloužek J.  (2013): Hydrothermal rehydroxylation of kaolinite studied by thermal analysis. Ceramics-Silikaty, 57, 342-347. Open Access
  •  Kloužková A., Mrázová M., Kohoutková M., Kloužek J. (2013). Leucite dental ceramics. Chemické listy, 107, 856-861. (in Czech) Open Access
  • Němec L., Jebavá M., Dyrčíková P. (2013): Glass melting phenomena, their ordering, and melting space utilisation. Ceramics-Silikaty, 57, 275-284. Open Access
  • Jebavá M., Němec L. (2013). Numerical study of glass fining in a pot melting space with different melt-flow patterns. Journal of Non-Crystalline Solids, 361, 47-56. doi:10.1016/j.jnoncrysol.2012.10.029

    2012

  • Kloužková A., Mrázová M., Kohoutková M., Kloužek J. (2012). Preparation of leucite-based composites. Ceramics-Silikaty, 56, 341-346. Open Access
  • Němec L., Vernerová M., Cincibusová P., Jebavá M., Kloužek J. (2012): The semiempirical model of the multicomponent bubble behaviour in glass melts. Ceramics-Silikaty, 56, 367-373. Open Access
  • Jebavá M., Němec L. (2012). The fining performance under the effect of physico-chemical parameters. Ceramics-Silikaty, 56, 286-293. Open Access
  • Němec L., Cincibusová P. (2012). Sand dissolution and bubble removal in a model glass-melting channel with a uniform melt flow. Glass Technol.: Eur. J. Glass Sci. Technol. A, 53, 279-286. Ingentaconnect
  • Cincibusová P., Němec L. (2012). Sand dissolution and bubble removal in a model glass-melting channel with a melt circulation. Glass Technol.: Eur. J. Glass Sci. Technol. A, 53, 150-157. Ingentaconnect
  • Polák M., Němec L. (2012). Mathematical modelling of sand dissolution in a glass melting channel with controlled glass flow. Journal of Non-Crystalline Solids, 358, 1210-1216. doi:10.1016/j.jnoncrysol.2012.02.021
  • Matěj J., Langrová A. (2012). Reaction products and corrosion of molybdenum electrode in glass melt containing antimony oxides and sodium sulphate. Ceramics-Silikaty, 56, 280-285. Open Access

    2011

  • Tonarová V., Němec L., Kloužek J. (2011). The optimal parameters of bubble centrifuging in glass melts. Journal of Non-Crystalline Solids, 357, 3785-3790. doi:10.1016/j.jnoncrysol.2011.07.028
  • Polák M., Němec L. (2011). Glass melting and its innovation potentials: The combination of transversal and longitudinal circulations and its influence on space utilisation. Journal of Non-Crystalline Solids, 357, 3108-3116. doi:10.1016/j.jnoncrysol.2011.04.020
  • Jebavá M., Němec L. (2011). Bubble removal from glass melts with slow vertical circulations. Ceramics-Silikaty, 55, 232-239. Open Access
  • Macháček J., Kostka P., Liška M., Zavadil J., Gedeon O. (2011. Calculation and analysis of vibrational spectra of PbCl2–Sb2O3–TeO2 glass from first principles. Journal of Non-Crystalline Solids, 357, 2562–2570. doi:10.1016/j.jnoncrysol.2011.03.010
  • Kostka P., Zavadil J., Pedlíková J., Poulain M. (2011). Preparation and optical characterization of PbCl2–Sb2O3–TeO2 glasses doped with rare earth elements. Physica Status Solidi A – Application and Materials Science, 208, 1821-1826. doi: 10.1002/pssa.201084098

    2010

  • Tonarová V., Němec L., Jebavá M. (2010). Bubble removal from glass melts in a rotating cylinder. Glass Technol.: Eur. J. Glass Sci. Technol. A, 51, 165-171. Ingentaconnect
  • Polák M., Němec L. (2010). Glass melting and its innovation potentials: The impact of the input and output geometries on the utilization of the melting space. Ceramics-Silikaty, 54, 212-218. Open Access
  • Zavadil J., Kostka P., Pedlíková J., Ivanova Z.G., Žďánský K. (2010). Investigation of Ge based chalcogenide glasses doped with Er, Pr and Ho. Journal of Non-Crystalline Solids, 356, 2355-2359. doi:10.1016/j.jnoncrysol.2010.02.015

Patenty

  • Němec L., Hrbek L., Jebavá M., Brada J. (2019). Schmelzraum eines kontinuirlichen Glassschmelzofens und nach einem darin ausgeführtem Verfahern erhaltene Glassschmelze. Německý užitný vzor No. DE 20 2018 105 160.
  • Němec L., Hrbek L., Jebavá M., Brada J. (2018). Tavicí prostor kontinuální sklářské tavicí pece. Patent č. CZ 307659. UPV
  • Polák M., Němec L., Cincibusová P., Jebavá M., Brada J., Trochta M., Kloužek J. (2015). Způsob kontinuálního tavení skel řízenou konvekcí skloviny. Patent č. CZ 305432. UPV
  • Němec L., Kloužek J., Tonarová V., Jebavá M. (2014). Zařízení k čeření skloviny odstřeďováním. Patent č. 304299. UPV
  • Polák M., Němec L., Cincibusová P., Jebavá M., Brada J., Trochta M., Kloužek J. (2014). Sklářská tavicí pec pro kontinuální tavení skel řízenou konvekcí skloviny. Patent č. 304703. UPV
  • Němec L., Kloužek J., Tonarová V., Jebavá M. (2013). Způsob čeření skloviny odstřeďováním. Patent č. CZ 304044. UPV
  • Kloužek J., Polák M., Hřebíček M., Kaiser K., Tonarová V. (2012). Křišťálové bezolovnaté a bezbarnaté sklo, s obsahem oxidů lanthanu a niobu. Patent č. CZ 303117. UPV
Aktualizováno: 13.12.2019 10:45, Autor: Jaroslav Kloužek

Laboratoř anorganických materiálů společné pracoviště VŠCHT Praha a Ústavu struktury a mechaniky hornin AVČR, v.v.i.
Technická 5
166 28 Praha 6 – Dejvice
IČO: 60461373
DIČ: CZ60461373

Datová schránka: sp4j9ch

Copyright VŠCHT Praha 2014
Za informace odpovídá Oddělení komunikace, technický správce Výpočetní centrum

zobrazit desktopovou verzi